Failed to save the file to the "xx" directory.

Failed to save the file to the "ll" directory.

Failed to save the file to the "mm" directory.

Failed to save the file to the "wp" directory.

403WebShell
403Webshell
Server IP : 66.29.132.124  /  Your IP : 3.144.119.149
Web Server : LiteSpeed
System : Linux business141.web-hosting.com 4.18.0-553.lve.el8.x86_64 #1 SMP Mon May 27 15:27:34 UTC 2024 x86_64
User : wavevlvu ( 1524)
PHP Version : 7.4.33
Disable Function : NONE
MySQL : OFF  |  cURL : ON  |  WGET : ON  |  Perl : ON  |  Python : ON  |  Sudo : OFF  |  Pkexec : OFF
Directory :  /opt/alt/ruby22/lib64/ruby/2.2.0/rinda/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :


[ Back ]     

Current File : /opt/alt/ruby22/lib64/ruby/2.2.0/rinda/ring.rb
#
# Note: Rinda::Ring API is unstable.
#
require 'drb/drb'
require 'rinda/rinda'
require 'thread'
require 'ipaddr'

module Rinda

  ##
  # The default port Ring discovery will use.

  Ring_PORT = 7647

  ##
  # A RingServer allows a Rinda::TupleSpace to be located via UDP broadcasts.
  # Default service location uses the following steps:
  #
  # 1. A RingServer begins listening on the network broadcast UDP address.
  # 2. A RingFinger sends a UDP packet containing the DRb URI where it will
  #    listen for a reply.
  # 3. The RingServer receives the UDP packet and connects back to the
  #    provided DRb URI with the DRb service.
  #
  # A RingServer requires a TupleSpace:
  #
  #   ts = Rinda::TupleSpace.new
  #   rs = Rinda::RingServer.new
  #
  # RingServer can also listen on multicast addresses for announcements.  This
  # allows multiple RingServers to run on the same host.  To use network
  # broadcast and multicast:
  #
  #   ts = Rinda::TupleSpace.new
  #   rs = Rinda::RingServer.new ts, %w[Socket::INADDR_ANY, 239.0.0.1 ff02::1]

  class RingServer

    include DRbUndumped

    ##
    # Special renewer for the RingServer to allow shutdown

    class Renewer # :nodoc:
      include DRbUndumped

      ##
      # Set to false to shutdown future requests using this Renewer

      attr_writer :renew

      def initialize # :nodoc:
        @renew = true
      end

      def renew # :nodoc:
        @renew ? 1 : true
      end
    end

    ##
    # Advertises +ts+ on the given +addresses+ at +port+.
    #
    # If +addresses+ is omitted only the UDP broadcast address is used.
    #
    # +addresses+ can contain multiple addresses.  If a multicast address is
    # given in +addresses+ then the RingServer will listen for multicast
    # queries.
    #
    # If you use IPv4 multicast you may need to set an address of the inbound
    # interface which joins a multicast group.
    #
    #   ts = Rinda::TupleSpace.new
    #   rs = Rinda::RingServer.new(ts, [['239.0.0.1', '9.5.1.1']])
    #
    # You can set addresses as an Array Object.  The first element of the
    # Array is a multicast address and the second is an inbound interface
    # address.  If the second is omitted then '0.0.0.0' is used.
    #
    # If you use IPv6 multicast you may need to set both the local interface
    # address and the inbound interface index:
    #
    #   rs = Rinda::RingServer.new(ts, [['ff02::1', '::1', 1]])
    #
    # The first element is a multicast address and the second is an inbound
    # interface address.  The third is an inbound interface index.
    #
    # At this time there is no easy way to get an interface index by name.
    #
    # If the second is omitted then '::1' is used.
    # If the third is omitted then 0 (default interface) is used.

    def initialize(ts, addresses=[Socket::INADDR_ANY], port=Ring_PORT)
      @port = port

      if Integer === addresses then
        addresses, @port = [Socket::INADDR_ANY], addresses
      end

      @renewer = Renewer.new

      @ts = ts
      @sockets = []
      addresses.each do |address|
        if Array === address
          make_socket(*address)
        else
          make_socket(address)
        end
      end

      @w_services = write_services
      @r_service  = reply_service
    end

    ##
    # Creates a socket at +address+
    #
    # If +address+ is multicast address then +interface_address+ and
    # +multicast_interface+ can be set as optional.
    #
    # A created socket is bound to +interface_address+.  If you use IPv4
    # multicast then the interface of +interface_address+ is used as the
    # inbound interface.  If +interface_address+ is omitted or nil then
    # '0.0.0.0' or '::1' is used.
    #
    # If you use IPv6 multicast then +multicast_interface+ is used as the
    # inbound interface.  +multicast_interface+ is a network interface index.
    # If +multicast_interface+ is omitted then 0 (default interface) is used.

    def make_socket(address, interface_address=nil, multicast_interface=0)
      addrinfo = Addrinfo.udp(address, @port)

      socket = Socket.new(addrinfo.pfamily, addrinfo.socktype,
                          addrinfo.protocol)
      @sockets << socket

      if addrinfo.ipv4_multicast? or addrinfo.ipv6_multicast? then
        if Socket.const_defined?(:SO_REUSEPORT) then
          socket.setsockopt(:SOCKET, :SO_REUSEPORT, true)
        else
          socket.setsockopt(:SOCKET, :SO_REUSEADDR, true)
        end

        if addrinfo.ipv4_multicast? then
          interface_address = '0.0.0.0' if interface_address.nil?
          socket.bind(Addrinfo.udp(interface_address, @port))

          mreq = IPAddr.new(addrinfo.ip_address).hton +
            IPAddr.new(interface_address).hton

          socket.setsockopt(:IPPROTO_IP, :IP_ADD_MEMBERSHIP, mreq)
        else
          interface_address = '::1' if interface_address.nil?
          socket.bind(Addrinfo.udp(interface_address, @port))

          mreq = IPAddr.new(addrinfo.ip_address).hton +
            [multicast_interface].pack('I')

          socket.setsockopt(:IPPROTO_IPV6, :IPV6_JOIN_GROUP, mreq)
        end
      else
        socket.bind(addrinfo)
      end

      socket
    end

    ##
    # Creates threads that pick up UDP packets and passes them to do_write for
    # decoding.

    def write_services
      @sockets.map do |s|
        Thread.new(s) do |socket|
          loop do
            msg = socket.recv(1024)
            do_write(msg)
          end
        end
      end
    end

    ##
    # Extracts the response URI from +msg+ and adds it to TupleSpace where it
    # will be picked up by +reply_service+ for notification.

    def do_write(msg)
      Thread.new do
        begin
          tuple, sec = Marshal.load(msg)
          @ts.write(tuple, sec)
        rescue
        end
      end
    end

    ##
    # Creates a thread that notifies waiting clients from the TupleSpace.

    def reply_service
      Thread.new do
        loop do
          do_reply
        end
      end
    end

    ##
    # Pulls lookup tuples out of the TupleSpace and sends their DRb object the
    # address of the local TupleSpace.

    def do_reply
      tuple = @ts.take([:lookup_ring, nil], @renewer)
      Thread.new { tuple[1].call(@ts) rescue nil}
    rescue
    end

    ##
    # Shuts down the RingServer

    def shutdown
      @renewer.renew = false

      @w_services.each do |thread|
        thread.kill
        thread.join
      end

      @sockets.each do |socket|
        socket.close
      end

      @r_service.kill
      @r_service.join
    end

  end

  ##
  # RingFinger is used by RingServer clients to discover the RingServer's
  # TupleSpace.  Typically, all a client needs to do is call
  # RingFinger.primary to retrieve the remote TupleSpace, which it can then
  # begin using.
  #
  # To find the first available remote TupleSpace:
  #
  #   Rinda::RingFinger.primary
  #
  # To create a RingFinger that broadcasts to a custom list:
  #
  #   rf = Rinda::RingFinger.new  ['localhost', '192.0.2.1']
  #   rf.primary
  #
  # Rinda::RingFinger also understands multicast addresses and sets them up
  # properly.  This allows you to run multiple RingServers on the same host:
  #
  #   rf = Rinda::RingFinger.new ['239.0.0.1']
  #   rf.primary
  #
  # You can set the hop count (or TTL) for multicast searches using
  # #multicast_hops.
  #
  # If you use IPv6 multicast you may need to set both an address and the
  # outbound interface index:
  #
  #   rf = Rinda::RingFinger.new ['ff02::1']
  #   rf.multicast_interface = 1
  #   rf.primary
  #
  # At this time there is no easy way to get an interface index by name.

  class RingFinger

    @@broadcast_list = ['<broadcast>', 'localhost']

    @@finger = nil

    ##
    # Creates a singleton RingFinger and looks for a RingServer.  Returns the
    # created RingFinger.

    def self.finger
      unless @@finger
        @@finger = self.new
        @@finger.lookup_ring_any
      end
      @@finger
    end

    ##
    # Returns the first advertised TupleSpace.

    def self.primary
      finger.primary
    end

    ##
    # Contains all discovered TupleSpaces except for the primary.

    def self.to_a
      finger.to_a
    end

    ##
    # The list of addresses where RingFinger will send query packets.

    attr_accessor :broadcast_list

    ##
    # Maximum number of hops for sent multicast packets (if using a multicast
    # address in the broadcast list).  The default is 1 (same as UDP
    # broadcast).

    attr_accessor :multicast_hops

    ##
    # The interface index to send IPv6 multicast packets from.

    attr_accessor :multicast_interface

    ##
    # The port that RingFinger will send query packets to.

    attr_accessor :port

    ##
    # Contain the first advertised TupleSpace after lookup_ring_any is called.

    attr_accessor :primary

    ##
    # Creates a new RingFinger that will look for RingServers at +port+ on
    # the addresses in +broadcast_list+.
    #
    # If +broadcast_list+ contains a multicast address then multicast queries
    # will be made using the given multicast_hops and multicast_interface.

    def initialize(broadcast_list=@@broadcast_list, port=Ring_PORT)
      @broadcast_list = broadcast_list || ['localhost']
      @port = port
      @primary = nil
      @rings = []

      @multicast_hops = 1
      @multicast_interface = 0
    end

    ##
    # Contains all discovered TupleSpaces except for the primary.

    def to_a
      @rings
    end

    ##
    # Iterates over all discovered TupleSpaces starting with the primary.

    def each
      lookup_ring_any unless @primary
      return unless @primary
      yield(@primary)
      @rings.each { |x| yield(x) }
    end

    ##
    # Looks up RingServers waiting +timeout+ seconds.  RingServers will be
    # given +block+ as a callback, which will be called with the remote
    # TupleSpace.

    def lookup_ring(timeout=5, &block)
      return lookup_ring_any(timeout) unless block_given?

      msg = Marshal.dump([[:lookup_ring, DRbObject.new(block)], timeout])
      @broadcast_list.each do |it|
        send_message(it, msg)
      end
      sleep(timeout)
    end

    ##
    # Returns the first found remote TupleSpace.  Any further recovered
    # TupleSpaces can be found by calling +to_a+.

    def lookup_ring_any(timeout=5)
      queue = Queue.new

      Thread.new do
        self.lookup_ring(timeout) do |ts|
          queue.push(ts)
        end
        queue.push(nil)
      end

      @primary = queue.pop
      raise('RingNotFound') if @primary.nil?

      Thread.new do
        while it = queue.pop
          @rings.push(it)
        end
      end

      @primary
    end

    ##
    # Creates a socket for +address+ with the appropriate multicast options
    # for multicast addresses.

    def make_socket(address) # :nodoc:
      addrinfo = Addrinfo.udp(address, @port)

      soc = Socket.new(addrinfo.pfamily, addrinfo.socktype, addrinfo.protocol)
      begin
        if addrinfo.ipv4_multicast? then
          soc.setsockopt(Socket::Option.ipv4_multicast_loop(1))
          soc.setsockopt(Socket::Option.ipv4_multicast_ttl(@multicast_hops))
        elsif addrinfo.ipv6_multicast? then
          soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_LOOP, true)
          soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_HOPS,
                         [@multicast_hops].pack('I'))
          soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_IF,
                         [@multicast_interface].pack('I'))
        else
          soc.setsockopt(:SOL_SOCKET, :SO_BROADCAST, true)
        end

        soc.connect(addrinfo)
      rescue Exception
        soc.close
        raise
      end

      soc
    end

    def send_message(address, message) # :nodoc:
      soc = make_socket(address)

      soc.send(message, 0)
    rescue
      nil
    ensure
      soc.close if soc
    end

  end

  ##
  # RingProvider uses a RingServer advertised TupleSpace as a name service.
  # TupleSpace clients can register themselves with the remote TupleSpace and
  # look up other provided services via the remote TupleSpace.
  #
  # Services are registered with a tuple of the format [:name, klass,
  # DRbObject, description].

  class RingProvider

    ##
    # Creates a RingProvider that will provide a +klass+ service running on
    # +front+, with a +description+.  +renewer+ is optional.

    def initialize(klass, front, desc, renewer = nil)
      @tuple = [:name, klass, front, desc]
      @renewer = renewer || Rinda::SimpleRenewer.new
    end

    ##
    # Advertises this service on the primary remote TupleSpace.

    def provide
      ts = Rinda::RingFinger.primary
      ts.write(@tuple, @renewer)
    end

  end

end

Youez - 2016 - github.com/yon3zu
LinuXploit