Failed to save the file to the "xx" directory.

Failed to save the file to the "ll" directory.

Failed to save the file to the "mm" directory.

Failed to save the file to the "wp" directory.

403WebShell
403Webshell
Server IP : 66.29.132.124  /  Your IP : 3.142.133.20
Web Server : LiteSpeed
System : Linux business141.web-hosting.com 4.18.0-553.lve.el8.x86_64 #1 SMP Mon May 27 15:27:34 UTC 2024 x86_64
User : wavevlvu ( 1524)
PHP Version : 7.4.33
Disable Function : NONE
MySQL : OFF  |  cURL : ON  |  WGET : ON  |  Perl : ON  |  Python : ON  |  Sudo : OFF  |  Pkexec : OFF
Directory :  /proc/self/root/usr/include/linux/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :


[ Back ]     

Current File : /proc/self/root/usr/include/linux/tty_flags.h
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _LINUX_TTY_FLAGS_H
#define _LINUX_TTY_FLAGS_H

/*
 * Definitions for async_struct (and serial_struct) flags field also
 * shared by the tty_port flags structures.
 *
 * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
 *
 * Bits [0..ASYNCB_LAST_USER] are userspace defined/visible/changeable
 * [x] in the bit comments indicates the flag is defunct and no longer used.
 */
#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
				    * on the callout port */
#define ASYNCB_FOURPORT		 1 /* Set OUT1, OUT2 per AST Fourport settings */
#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
#define ASYNCB_SPLIT_TERMIOS	 3 /* [x] Separate termios for dialin/callout */
#define ASYNCB_SPD_HI		 4 /* Use 57600 instead of 38400 bps */
#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
				    * autoconfiguration */
#define ASYNCB_SESSION_LOCKOUT	 8 /* [x] Lock out cua opens based on session */
#define ASYNCB_PGRP_LOCKOUT	 9 /* [x] Lock out cua opens based on pgrp */
#define ASYNCB_CALLOUT_NOHUP	10 /* [x] Don't do hangups for cua device */
#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
				    * checks.  Note: can be dangerous! */
#define ASYNCB_AUTOPROBE	15 /* [x] Port was autoprobed by PCI/PNP code */
#define ASYNCB_MAGIC_MULTIPLIER	16 /* Use special CLK or divisor */
#define ASYNCB_LAST_USER	16

/*
 * Internal flags used only by kernel (read-only)
 *
 * WARNING: These flags are no longer used and have been superceded by the
 *	    TTY_PORT_ flags in the iflags field (and not userspace-visible)
 */
#ifndef _KERNEL_
#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
#define ASYNCB_CLOSING		27 /* Serial port is closing */
#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
#define ASYNCB_FIRST_KERNEL	22
#endif

/* Masks */
#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
#define ASYNC_SAK		(1U << ASYNCB_SAK)
#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
#define ASYNC_MAGIC_MULTIPLIER	(1U << ASYNCB_MAGIC_MULTIPLIER)

#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define ASYNC_DEPRECATED	(ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \
		ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
		ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)

#ifndef _KERNEL_
/* These flags are no longer used (and were always masked from userspace) */
#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
#endif

#endif

Youez - 2016 - github.com/yon3zu
LinuXploit